DRYPOINT® AC

DRYPOINT® AC adsorption dryers are available in two series:
Performance Range 10 - 112 m³/h
Significant reduction of operating costs
Flow-optimized CLEARPOINT® compressed air filters and an energy-saving compressor synchronisationcontrol , which can be energized via optional software, reduce the cost. No regeneration air escapes from the system during the compressor downtime.

High operational reliability
An adsorption dryer which is installed behind a receiver usually has larger dimensions in order to exclude overload in the compressor synchronization. DRYPOINT® AC - installed behind the receiver - is far more economic and safe as a result of the system in itself. The optional energy management automatically determines the delay time using the data acquired from the station. During this period, the dryer remains active. There is no risk of overload and the oversizing of components is unnecessary.

Extremely easy to maintain
The electronic control contains an integrated service module with an automatic service interval indicator and a PC interface for remote monitoring and troubleshooting. Thanks to the cartridges, the replacement of the drying agent is effected easily and speedily - without loosening the compressed air line. Using BEKO TECHNOLOGIES's DRYPOINT® AC reduces service requirements by up to 75%, compared with conventional dryers.

Easy Installation
DRYPOINT® AC devices are prepared for the most diverse range of installation and integration conditions (standard fittings). The compressed air inlet may be installed flexibly. Horizontal or vertical operation is possible.

Performance Range 135 - 1.550 m³/h
Fail safe
At an external interruption of the power supply, conventional dryers are overloaded and lose their ability to function. The consequence: water is introduced into the compressed air system. The concept of the DRYPOINT® AC prevents unwanted loading of the dryer during interruption of the power supply and guarantees preservation of the function. The compressed air system remains dry.

Control
DRYPOINT® AC is also suitable for discontinuous operation. Reduction of the regeneration air corresponds to the actual requirements via coupling with the compressor (compressor synchronisation control). An optional, load-dependent control may be retrofitted at any time.

Reliable components
Both drying agent containers are kept under alternating pressure. Therefore, they are designed to be durable throughout alternating pressure operation, and functional with all fittings. Their suitability for unlimited load alterations prolongs their lifespan and eliminates any risk for personnel as well as for the system.

Extremely easy to maintain
Each container is equipped with an overhead, easily accessible service sleeve. All components are accessible from the front. No time-consuming dismounting and remounting of the pipe bridge is required for replacement of the drying agent.